When not
in use, store the regulator in a clean, dry, and safe place.
Inspect
and test at least every 6 months after first use.
Have only
qualified repairmen service, test, and clean the regulator.
Brown university faculty, students, or staff are not authorized
to make regulator repairs or to conduct regulator maintenance.
If you have questions regarding regulator maintenance please
contact EHS at 3-1737.
The gauge
lenses are made from Polycarbonate - Use only soapy water to
clean, then wipe dry using soft cloths. DO NOT USE SOLVENTS.
Use thread
sealants that are compatible with the gas being used.
