SES 2013
Skip over navigation

Crack initiation and growth: methods, applications, and challenges


Time Location Session Chair Paper Authors
Tue 9:00 - 10:30 Sayles Auditorium John Dempsey (Clarkson University), Gregory Rodin (ICES,UT Austin) Three dimensional fracture growth as a standard dissipative system: some general theorems and preliminary numerical analysis. Alberto Salvadori (University of Brescia / TUe), Francesca Fantoni (University of Brescia, Italy)
A Variational Approach to Hydraulic Fracturing Blaise Bourdin (Lsu), Chukwudi Chukwudozie (LSU)
3-D Simulation of Arbitrary Crack Growth Using a New Energy-Based Formulation Brett Davis (Cornell University), Paul Wawrzynek (), Anthony Ingraffea (Cornell University)
Three dimensional finite element simulations of ductile to brittle failure mode transition in glassy amorphous polymers Brunda Kattekola (IIT Kanpur), Sumit Basu (Indian Institute of Technology)
Tue 10:45 - 12:15 Sayles Auditorium Sumit Basu (Indian Institute of Technology), Alberto Salvadori (University of Brescia / TUe) The threshold for subcritical crack growth Gregory Rodin (ICES,UT Austin)
T-stresses for short and long cracks John Dempsey (Clarkson University)
Derivation of linear elastic from rescaled non-linear elastic quasi-static crack evolutions Rodica Toader (University of Udine)
Gradient Fracture Mechanics Elias Aifantis (Aristotle University of Thessa)
Tue 2:40 - 4:00 Sayles Auditorium Kenneth Liechti (), Rena Yu (University of Castilla-La Manc) The onset of cavitation for the equations of polyconvex elasticity Athanasios Tzavaras (University of Crete)
On vertical root fracture from condensation of gutta-percha Herzl Chai (Tel-Aviv University), Aviad Tamse (Tel Aviv University)
Flaw Insensitive Fracture in Nanocrystalline Graphene Teng Zhang (Brown unversity), Xiaoyan Li (Tsinghua University), sara kadkhodaei (Brown university), Huajian Gao (Brown University)
Tue 4:20 - 5:40 Sayles Auditorium Blaise Bourdin (Lsu), Athanasios Tzavaras (University of Crete) CATHODIC DELAMINATION AT POLYMER/METAL INTERFACES Kenneth Liechti (), Thomas Mauchien (UT Austin)
Mechanisms Associated With Damage Tolerance in Ti Alloys Shmuel Osovski (University of North Texas), Ankit Srivastava (University of North Texas), Alan Needleman (University of North Texas), James Williams (University of North Texas)
Mixed-Mode I/II Crack and Electrical Resistance Behaviors of Carbon Nanotube/Polymer Composites Yasuhide Shindo (Tohoku University), Tomo Takeda (), Fumitsugu Naraoka (), Yu Kuronuma (), Fumio Narita (Tohoku University)
Wed 9:00 - 10:30 Barus-Holley 161 Robert Lipton (LSU) Experimental Examination of the Effect of Cavity in Shear Failure of Ductile Materials Ali Ghahremaninezhad (University of Miami), K Ravi-Chandar (University of Texas at Austin)
Creating a failure criteria for aluminum alloys from 3D finite element modeling of void growth and coalescence Geoffrey Bomarito (Cornell University), Derek Warner (Cornell University)
Effect of Nonproportional Loadings on Ductile Fracture: Experiments and analysis Shamik Basu (Texas A&M University), Amine Benzerga (Texas A&M University)
Effect of Inclusion Distribution on Ductile Fracture Toughness and Fracture Surface Roughness Ankit Srivastava (University of North Texas), Shmuel Osovski (University of North Texas), Laurent Ponson (Institut Jean Le Rond d'Alembert Université Pierre et Marie Curie), Viggo Tvergaard (Technical University of Denmark), Elisabeth Bouchaud (CEA-Saclay and ESPCI Paris Tech), Alan Needleman (University of North Texas)
Wed 10:45 - 12:15 Barus-Holley 161 Yasuhide Shindo (Tohoku University), Herzl Chai (Tel-Aviv University) Concurrent adaptive multiscale methodology for crack propagation in heterogeneous media Franck Vernerey (University of Colorado Boulder), Mohamedreza Kabiri (University of Colorado Boulder)
Meshfree simulation of compressive damage in quasi-brittle materials Rena Yu (University of Castilla-La Manc), Gonzalo Ruiz (Univerisity of Castilla-La Mancha), Luis Saucedo (Univerisity of Castilla-La Mancha)
Peridynamics with unstable bonds small horizon limits and dynamic fracture mechanics Robert Lipton (LSU)
A multi-scale material design framework for predicting fracture toughness as function of microstructure Yan Li (Georgia Tech), David McDowell (Gerogia Tech), Min Zhou ()
Wed 1:30 - 2:50 Barus-Holley 161 Rodica Toader (University of Udine), Rena Yu (University of Castilla-La Manc) The effect cold expansion on the fatigue of aluminium alloy specimen containing fastener hole simulated using Finite Elements Method and Boundary Elements Method Cedric Maranta-Sinigaglia (Glyndwr University)
Fatigue Behavior of Bulk-Metallic Glasses Gongyao Wang (University of Tennessee), Yoshihiko Yokoyama (), Xiaoqing Jin (), Leon Keer (), Xie Xie (University of Tennessee), Peter Liaw ()
Ip THEORY OF FRACTURE MECHANICS FOR FATIGUE LOADING VIJAY UKADGAONKER (IIT BOMBAY)
Ip THEORY EXTENDED TO THREE DIMENSIONS VIJAY UKADGAONKER (IIT BOMBAY)