*Heading
** Job name: Job-1 Model name: Model-1
** Generated by: Abaqus/CAE 6.14-1
*Preprint, echo=NO, model=NO, history=NO, contact=NO
**
** PARTS
**
*Part, name=Part-1
*End Part
**  
**
** ASSEMBLY
**
*Assembly, name=Assembly
**  
*Instance, name=Part-1-1, part=Part-1
*Node
      1, -0.400000006, -0.200000003,  0.400000006
      2, -0.400000006,  0.200000003,  0.400000006
      3, -0.400000006, -0.200000003,           0.
      4, -0.400000006,  0.200000003,           0.
      5,           0., -0.200000003,  0.400000006
      6,           0.,  0.200000003,  0.400000006
      7,           0., -0.200000003,           0.
      8,           0.,  0.200000003,           0.
      9,  0.400000006, -0.200000003,  0.400000006
     10,  0.400000006,  0.200000003,  0.400000006
     11,  0.400000006, -0.200000003,           0.
     12,  0.400000006,  0.200000003,           0.
*Element, type=C3D8
1,  5,  6,  8,  7,  1,  2,  4,  3
2,  9, 10, 12, 11,  5,  6,  8,  7
*Nset, nset=Set-1, generate
  1,  12,   1
*Elset, elset=Set-1
 1, 2
** THE LINE BELOW WAS EDITED TO ASSIGN THE USER MATERIAL
*Solid Section, elset=Set-1, material=usermat_hyperelastic
1.,
*End Instance
**  
*Nset, nset=Set-1, instance=Part-1-1, generate
 1,  4,  1
*Elset, elset=Set-1, instance=Part-1-1
 1,
*Nset, nset=Set-2, instance=Part-1-1
 1,
*Nset, nset=Set-3, instance=Part-1-1
 3,
*Nset, nset=Set-4, instance=Part-1-1, generate
  9,  12,   1
*Elset, elset=Set-4, instance=Part-1-1
 2,
*End Assembly
** 
**  THE LINES BELOW WERE EDITED TO DEFINE THE USER MATERIAL 
*Material, name=usermat_hyperelastic
*user material, constants=2, type=mechanical
 10.0, 200.d0
** This defines the number of state variables (none in this case)
*DEPVAR
1
** ----------------------------------------------------------------** ----------------------------------------------------------------
** 
** STEP: Step-1
** 
*Step, name=Step-1, nlgeom=YES
*Static, direct
0.2, 1., 
** 
** BOUNDARY CONDITIONS
** 
** Name: BC-1 Type: Displacement/Rotation
*Boundary
Set-1, 1, 1
** Name: BC-2 Type: Displacement/Rotation
*Boundary
Set-2, 2, 2
Set-2, 3, 3
** Name: BC-3 Type: Displacement/Rotation
*Boundary
Set-3, 2, 2
** Name: BC-4 Type: Displacement/Rotation
*Boundary
Set-4, 1, 1, 0.5
** 
** OUTPUT REQUESTS
** 
*Restart, write, frequency=0
** 
** FIELD OUTPUT: F-Output-1
** 
*Output, field, variable=PRESELECT
** 
** HISTORY OUTPUT: H-Output-1
** 
*Output, history, variable=PRESELECT
*End Step